5 Reasons Why Your Asko Dryer Takes Too Long to Dry

Share on facebook
Facebook
Share on twitter
Twitter
Share on pinterest
Pinterest
Share on email
Email
Share on print
Print

When a dryer takes forever to dry clothes it eats up money and resources as well as valuable time. Why is my Asko dryer taking too long to dry clothes? Overloading may be restricting the airflow needed for optimum efficiency. Learn the most likely reasons your Asko dryer takes too long to dry and the DIY solutions that shorten drying times.

Asko Dryer Takes Too Long to Dry?
Try These DIY Tips.

When your Asko dryer takes too long to dry, a lack of proper maintenance or the wrong use and care is usually responsible. From overloading to clogged dryer vents, try these Ako dryer troubleshooting tips to improve its efficiency and extend its lifespan.

1. Drying Too Many Items

Think twice before adding more than one wash load to your dryer. When the dryer is overloaded with clothes to the top of the dryer drum, little room is left for hot air to circulate. This lack of airflow means that, instead of saving time, your Asko dryer takes too long to dry clothes.

Refer to your user manual to determine the exact capacity of your model dryer. It’s generally recommended to fill the dryer with just one wash load at a time, making sure it’s never more than ¾ full.

2. Clothes Too Wet After Washing

Washer issues can easily disguise themselves as drying problems. When clothes are too wet after a wash cycle, you’ll find your Asko dryer taking multiple cycles to dry them. If this occurs with every wash load, these longer times and heavier loads can lead to costly part failures and breakdowns for your dryer.

Make sure your washer settings include a spin cycle that’s adequate for your wash load. If your settings are correct, your washer may need a professional assessment to make sure it’s spinning and draining properly.

3. Need to Choose Different Dryer Settings

Like your washer, some dryers offer multiple drying options and features for different laundry loads. If your Asko dryer takes too long to dry, consider raising the dryer’s heating temperature or using a different setting to improve performance. 

The following drying options can improve drying times for certain laundry loads:

  • Bedding: This setting uses a lower drying temperature and longer drying times to more thoroughly dry thick, heavy bedding.
  • Quick Pro: Bursts of increased heat offer the ability to dry a single load of laundry in under an hour.
  • Auto Dry: Operates with a higher level of heat to dry thicker fabrics, like denim and heavy cotton, in a shorter amount of time.

asko dryer takes too long to dry
Image from Asko

4. Clean the Dryer Lint Screen

Cleaning the dryer lint screen before every drying cycle can help decrease drying times. As clothes tumble in the dryer drum, the small clothing fibers we call lint detach, collecting in the lint screen. This accumulated lint can restrict airflow, elongating drying times. Wondering how to clean Asko dryer filter? Before starting a drying cycle, simply remove any accumulated lint with your hand or a paper towel.

On a monthly basis, perform a more thorough cleaning by removing the filter and rinsing it under running water. Scrub away detergent or dryer sheet residue with a soft brush and allow the filter to air dry completely before replacing. While the lint screen dries, remove any accumulated lint in the lint screen housing with a vacuum’s narrow hose attachment.

asko dryer not drying
Image from Asko

5. Restricted Airflow From Clogged Vents

Even with a clean lint screen, lint can accumulate in dryer vents, eventually causing clogs that restrict airflow. Most dryer maintenance dips suggest cleaning the vents annually to remove clogs or obstructions. However, if you notice your Asko dryer not drying as well, try more frequent cleanings before considering a clothes dryer repair.

Follow these steps to clean dryer vents:

  1. Unplug the dryer and move it away from the wall to access the vent.
  2. Inspect the vent for kinks that can also restrict airflow, gently untwisting them if necessary. If the vent is properly positioned, disconnect it at the wall and dryer.
  3. Use a vacuum’s narrow hose attachment to remove any buildup or obstructions in the vent.
  4. Check your home’s exterior vent, removing any dirt and debris that may be blocking the opening.
  5. Reconnect the interior vent to the dryer and wall before plugging the dryer back in and restoring power.

If these DIY tips still result in long drying times, it may be time for an Asko dryer service to assess the problem. Schedule your expert repair with Appliance Service Station today!

Leave a Reply

Your email address will not be published. Required fields are marked *

Archives

More to Explore